- Overview
- Product Parameters
- Product Description
- Operating instructions
- Company Profile
- Packaging & Shipping
Basic Info.
Model NO.
EBT-26KWH
Number of Charging Interfaces
One Pile with One Charge
Start Mode
APP Control, Remote Control
Weights
About 400kg
Output Voltage
DC200V-750V
Total Output Power
30kw
DC Charger Gun
Gbt*1(CCS1/CCS2)
Charge Gun Cable Length
7 Meters
Operation Mode
Single-Alone
Operating Temperature
-10ºC~60ºC
Recharge Mode
DC Charging Gun + AC Single Phase
Input Voltage
250V-850VDC
Input Current
0 to 60A
DC Input Current
0~45A
Efficiency
≥95%
Input Undervoltage Protection Point
860VDC, 845VDC Recovery
Input Overvoltage Protection Point
245VDC, 260VDC Recovery
Overtemperature Alarm
50-60°c
Transport Package
Wooden Case Packing
Specification
1300*710*980mm(Customized Flexible Size)
Trademark
szenbar. com
Origin
Guangdong, China
HS Code
8504409999
Production Capacity
50000pieces/Year
Product Description
| Produce sizes | 1300*710*980 mm |
| Total output power | 30kw |
| Charge Gun Cable Length | 7 meters |
| DC Charger gun | GBT*1(CCS1/CCS2) |
| Output Voltage | DC200V-750V |
| Input Voltage | 250V-850VDC |
| Output Current | 0 to 100A |
| Input Current | 0 to 60A |
| Operation mode | Single-Alone |
| efficiency | ≥95% |
| Operating temperature | -10ºC~60ºC |
| weights | About 400KG |
| Application scenario | EV emergency rescue, EV moblie charging |
| Installation methond | Vehicle-mounted /Electric wheel optional |
| Recharge mode | DC charging gun + AC single phase |
| | Charge Gun Cable Length | 7 meters | |
| | Charging gun auxiliary power output | 12V | |
| | sizes | 1300*710*980 mm | L*W*H, excluding snatch and coil wire dimensions |
| | weights | About 400KG | |
| Input Characteristics | |||
| | Input Voltage | 250V-850VDC | |
| | Input Current | 0 to 60A | |
| | DC Input Current | 0~45A | GB port, energy storage battery self replenishment |
| Output Characteristics | |||
| | Output voltage regulation range (high voltage mode) | 200V-1000VDC | Meet passenger cars, buses, trucks charging |
| | Output Current Adjustment Range (High Voltage Mode) | 0-100A | The system intelligently adjusts the output current according to the state of the storage battery. |
| | Output voltage regulation range (low voltage mode) | 150 to 500VDC | |
| | Output Current Adjustment Range (Low Voltage Mode) | 0 to 60A | |
| | efficiency | ≥95% | |
| | Total output power | 30KW | |
| Protective properties | |||
| | Input undervoltage protection point | 860VDC,845VDC Recovery | No output after protection; need to issue power-on command after recovery |
| | Input overvoltage protection point | 245VDC, 260VDC Recovery | No output after protection; need to issue power-on command after recovery |
| | Input overcurrent protection | Y | |
| | Output overvoltage protection | Y | |
| | Output overcurrent protection | Y | |
| | short circuit protection | Y | |
| | overtemperature alarm | 50-60°C | |
| | overtemperature protection | 60°C | |
| | Charge gun over-temperature alarm | 90°C | |
| | Charge gun over-temperature protection | 105°C | |
| | Emergency shutdown protection | Y | |
| | soft start time | 5-10 seconds | |
| | user interface | there are | 7.0 inch |
Switching on and off procedures
Start-up steps
- Connect the input wire;
- Switch on the device AC switch, at which point the device starts to self-test.
- 5-10 seconds system startup is complete and the charging pile enters standby mode.
- Connect the charging gun to the electric vehicle.
- Tap the screen according to the above instructions to enter the charging state, the charging indicator shows the operation state, and the display shows the total voltage, current, and SOC information of the current charging vehicle.
- In case of emergency, manually switch off the emergency stop switch to stop charging.
- The charging vehicle shows the end of charging (or manually switch off the start switch).
- Disconnect the charging gun first, before turning off the AC air switch.
- The cooling fan stops working and the power switch is turned off.
